Hatch Box

IMG_2846 IMG_2847Side walls are measured and cut, with stringers attached.

IMG_2848 IMG_2849Stringers all attached with glue in place, then everything is screwed together.

IMG_2852IMG_2851Different views with cover in place.  I decided to make the hatch box slightly smaller than the width of the opening, because I plan to use the box for housing the electrical switches and want easy access.

IMG_3106IMG_3102Here are the switches for all the electrical components. There is a matching switch on the opposite side of the box and not pictured is the volt meter, which is mounted in the center of the box just under the lid for easy read access.